 Friends links |
|
| Picture |
Heading |
Updated |
 |
Tin Bearing Silver Phoscopper Brazing Alloy
tin bearing silver phoscopper brazing alloy The product is used for brazing of copper and copper alloys. It has a lower melting point, excellent fluidity, good brazing properties. The brazing joint has high mechanical strength and smooth surface. Flux is |
2017-09-26 |
 |
Sn-Cu Solder
Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta |
2017-09-14 |
 |
Silver Paste
After the preparation of silver brazer into powder, make the powder into paste.It is suitable for narrow gap and automatic brazing of complex components, and easy to use. It can save the dosage。The product can be used to complex structure, with higher bra |
2017-09-12 |
 |
High Silver Brazing Alloy
High Silver brazing alloy owns good properties such as low melting point, excellent wettability and ability to fill the clearances, high mechanical strength, good plasticity, electrical conductivity and corrosion resistance. |
2017-09-07 |
 |
Tin Bronze Brazing Alloy
Tin bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. |
2017-09-05 |
 |
Brass Solder
Brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should be well |
2017-08-24 |
 |
AgCuZn Brazing Alloy
Ag-Cu-Zn brazing alloy owns good properties such as low melting point, excellent wettability and ability to fill the clearances, high mechanical strength, good plasticity, electrical conductivity and corrosion resistance. It is used for brazing of some fe |
2017-08-19 |
 |
Sn-Ag Solder
Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta |
2017-08-15 |
|
