 Friends links |
|
| Picture |
Heading |
Updated |
 |
Silicon Brass
Silicon brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should |
2017-12-14 |
 |
Nickel Bronze Brazing Alloy
Nickel bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. The strength of joint is hig |
2017-12-08 |
 |
Manganese Brass
Manganese brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of hard alloys. The dirt such as grease, oxide on the surface of brazing metals should be well cleaned before brazing.The fluxes |
2017-11-22 |
 |
Flux Cored Silver Brazing Alloy
The silver brazing alloy can be made into flux cored brazing alloy. Flux cored silver brazing alloy is applicable to automatic brazing. It has higher production efficiency, saves the material consumption. And it can be used to braze without flux. |
2017-11-18 |
 |
Pure Copper Solder
Pure Copper brazer is applied to the brazing of stainless steel,hard alloys such as tungsten, molybdenum, iron, kovar, nickel etc, applied widely in the industries of machinery, electromechanical, refrigeration, automobile and bicycle etc. |
2017-11-05 |
 |
Tin-bearing Silver Brazing Alloy
Tin-bearing silver brazing alloy owns good properties such as low melting point, excellent wettability and ability to fill the clearances, high mechanical strength, good plasticity, electrical conductivity and corrosion resistance. It is used for brazing |
2017-10-23 |
 |
Silver-copper-tin Brazing Alloys
Silver-copper-tin brazing alloys is a kind of silver-based solid solution. It has goodproperties such as excellent wettability and ability to fill the clearances, good plasticity and electrical conductivity. |
2017-10-06 |
 |
Flux-cored Aluminium Brazing Alloy
The Aluminium brazing alloy can be made into flux cored brazing alloy. Flux cored Aluminium brazing alloy is applicable to automatic brazing. It need not coating flux, can has higher production efficiency, saves the material consumption. |
2017-09-27 |
|
